Grayling PC700 High Temperature Glovebags for up to 700° f
ILC Dover’s high-temperature application glove bags are available in several different sizes to accommodate various pipe diameters from 1-30 inches, for horizontal and vertical pipes.
They are designed for low-pressure steam lines and hot water heating systems, offering a safer and more cost-effective solution than full-scale containment methods.
Why High-Temperature Application Glove Bags from ILC Dover?
No Downtime
Eliminates the need for costly shutdowns in power plants, paper mills, refineries, and other industries
Cost-Effective
Safer and more cost-effective than full-scale containment methods
Active Pipe Repair
Allows for emergency repair and maintenance on active pipes
The PC700 are manufactured from a silicone treated fiberglass type of material that duct tape will not stick to. The process for attaching these bags to the pipe will take two operators.
• The first operator will then use a stapler to staple together the material.
• Use the “collars” and straps provided to attach the ends of the bag to the pipe.
• Apply a bead of RTV (Room Temperature Vulcanizing) silicone sealant to the seams to complete the airtight seal between the bag and the pipe.
• Because steam could be generated inside the glovebag when water is introduced, dry removal is required. The material may be wetted in the debris area of the bag once the insulation has cooled to a temperature below 200°F. A variance may be required for utilizing a dry glovebag removal process.
The “viewing port” or window on the PC700 products should not be allowed to come into contact with a pipe that is over 500°F. Ideally, the viewing port should be positioned so that it is at least four inches away from a pipe over 500°F in temperature
High temperature glovebag allowing the removal of asbestos from pipes and ducts up to 700°F.
Useful Temp – up to 700° f
Standard Sizes – 60x60 (up to 12" Pipe), 60x72 (Up to 14" Pipe)- coms with one set of gloves
Special Order Sizes – 6084-2 (Up to 18" Pipe), 7296-2 (Up to 24" Pipe), 72120-2 (Up to 30" Pipe), V10 (Up to 10" Vertical Pipe), and V24-2 (Up to 24" Vertical Pipe)- all come with two sets of gloves except V10 which has 1 set
Material: STITCHED & SEALED HI TEMP PLASTIC
Maximum Load: 100 Pounds
Note Special Order sizes are non-returnable and require 3-week turnround for production
